Break Free Powder Blast

Vadim_demino
Добрый день, кто то использовал такое средство для чистки винтовки? Какие отзывы, рекомендации?
С уважением
brick-bat
https://guns.allzip.org/topic/91/2428774.html
Кажется третья страница.
Vadim_demino
brick-bat
https://guns.allzip.org/topic/91/2428774.html
Кажется третья страница.

В этой теме речь идёт совсем о другом средстве, почитайте внимательно.

Седой инженер
Vadim_demino

В этой теме речь идёт совсем о другом средстве, почитайте внимательно.

Я пользовал, его аналогом, Gunk-out. Мне понравилось, жаль что больше не завозят. А у Powder Blast запах цитрусовый, я потому и не брал его)))) Химия хорошая.

Vadim_demino
Седой инженер

Я пользовал, его аналогом, Gunk-out. Мне понравилось, жаль что больше не завозят. А у Powder Blast запах цитрусовый, я потому и не брал его)))) Химия хорошая.

Какая инструкция по его применению?
С уважением

Седой инженер
Vadim_demino

Какая инструкция по его применению?
С уважением

К сожалению, уже и не помню, но она есть на их официальном сайте.
http://www.safariland.com/prod...27.html#start=1


IMPORTANT: This product is a powerful solvent. DO NOT APPLY TO RUBBER OR PLASTIC GRIPS OR PARTS. Remove promptly with a cloth to avoid possible plastic damage. Powder Blast may damage painted finishes, camouflage or wood finishes and most polymers. Use with caution.

DIRECTIONS: Make sure the firearm is unloaded before cleaning. Follow manufacturer care and cleaning instructions.

1. Spray Powder BlastT on mechanisms, trigger group and surfaces to remove firing residue, carbon, oil, grease and plastic contamination. Use the extension tube for hard to reach components. USE CARE TO AVOID RUBBER AND PLASTIC COMPONENTS TO PREVENT DAMAGE.
2. For stubborn deposits, use KleenBoreT No. 10 Solvent and a nylon bristle gun brush to scrub fouled areas, then flush with Powder BlastT.
3. After cleaning, let air dry and apply a light coat of Break FreeT CLPT or Collector to all metal surfaces.

IMPORTANT: This product is a powerful solvent. DO NOT APPLY TO RUBBER OR PLASTIC GRIPS OR PARTS. Remove promptly with a cloth to avoid possible plastic damage. Powder BlastT may damage painted finishes, camouflage finishes, and wood finishes and most polymers. Use with caution.

IMPORTANT: This product is extremely flammable. Use only in well ventilated areas. Do not allow vapors to accumulate. Do not use in the presence of sparks, static discharge, flames or other sources of ignition.

DANGER: Contains Acetone and Toluene. Extremely flammable. Use only in a well ventilated area. Do not use near heat, sparks, open flame or other sources of ignition. Do not smoke in use area. Vapor harmful. Avoid prolonged or repeated breathing of vapors (or spray mist). If overcome by fumes, remove victim to fresh air. Resuscitate if necessary. Get immediate medical attention. Avoid contact with eyes and skin. In case of eye contact, flush immediately with plenty of water and continue for 15 minutes. If discomfort persists, see a physician. Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120?F.

WARNING: This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

FIRST AID: In case of eye or skin contact, flush with water for 15 minutes. If swallowed do not induce vomiting. If inhaled, seek fresh air immediately. If overcome by fumes, remove victim to fresh air. Resuscitate if necessary, get immediate medical attention. For additional information consult the Material Safety Data Sheet for this product.

KEEP OUT OF REACH OF CHILDREN.