APM
(8)Damascus APM 12/98 (no #003 made).
(1)Satin Blade Abalone Button Abalone Charging Handle Inlay Stainless Steel Handle PROTOTYPE APM from the MT Collection.
(1)Bead Blast Blade Abalone Button Al Handle PROTOTYPE APM from the MT Collection.
(4)Prototype APM (Al handles) Satin Blade with Abalone Button.
(76)APM 4/97 w/Dagger Logo- at least one retrofitted with White MOP button.
CFO
(2)Prototype CFO marked PROTOTYPE with MT Logo 10/94.
(400)CFO 2/95, 3/95, 4/95.
CFO II
(2)Damascus Hot Blued Blade STERILE ORIGINAL PROTOTYPE CFO II 01/2000.
(6)Marfione High Polished Blade STERILE PROTOTYPE CFO II 01/2000- 4 Double Grinds and 2 Chisels.
(2)Black HIGH Polished Blade STERILE PreProduction CFO II 05/2000.
(1)Mirror Blade STERILE PROTOTYPE CFO II with NO EDGE and marked with Tony's initials, ALM, as a gift to his son- made around 05/2000.
(4)Black Ti Coated 10V_ Steel Blade STERILE PROTOTYPE CFO II with Blood Grooves 01/2000.
(4)Bead Blast Blade STERILE PROTOTYPE CFO II 01/2000.
(12)SS handle Mirror blade Abalone Button and Abalone Inlaid Charging Handle CFO II 7/2000.
(34)SS handle DT Spirograph Damascus blade, button, and Charging Handle inlaid CFO II dated 8/2000- released in 9/2000- numbered up to #36.
(19)Black coated Ti handle CFO II with Hot bath blued Damascus blades.
(3)Rados blade CFO II.
(1)Slate Blue Handle CFO II with Abalone inlays, Dagger Logo, and Mirror polished blade. This is the only Blue CFO II. The Blue handle (chassis) was one of
the original prototype aluminum handles made when Tony was considering a production run a few years ago.
(1)Prototype Tactical Black CFO II with a hand ground black plain edge blade with the matt black boron coating. The handle (chasis) was one of the original
prototype aluminum handles made when Tony was considering a production run a few years ago. Dagger logo, smooth button, "Prototype" laser etched on the
charging handle. No date, no serial number.
(100+)All Black Tactical CFO II with Dagger logo and Special Combat Sheaths made for TAD in 8/2003.
(250+)Green Tactical CFO II's- 9/2003.
COMBAT TALON II
(1)High Polished Black Damascus Steel Blade PROTOTYPE Combat Talon II 6/99- this piece also was shown at the Shot Show 2000.
(11) Walter Brend Mirror Blade Original PROTOTYPE Combat Talon II 06/99.
(2?) Walter Brend Mirror Blade Combat Talon II made by Walter for staff after the Blade Show 1999.
(2-3)Mirror Polished CHISEL Ground Prototype CTII made by Tony after the Blade Show 1999.
(22) Walter Brend Satin Blade Original PROTOTYPE Combat Talon II 06/99.
(9 TOTAL- 4 were Chisel Ground, and 8 of them were Double Edged and one had a False Edge) Satin Blade PROTOTYPE Combat Talon II with Unique Blade Grinds by
Tony dated 6/99.
(up to 1500)(?)Production CTII with Walter Brend 1200 Grit Satin Finished Blade (1/2000, 2/2000 -various dates and S.N's).
(1)Production CTII #010 with Double Edged blade done after the Blade Show 2000 for a Customer who sent in his knife to MT for repair.
(120)Damascus blade Damascus button Tony and Al ground Dagger logo CTII dated 3/2000 BUT assembled in 5/2000- #'s 1-100 were done with DT Spirograph Damascus
and #'s 101-120 were done with DT Vines and Roses Damascus.
(? of 1500)Satin Finished Serrated blade CTII with New Style Concentric circles Serrated button (4/2000-various dates and S.N's).
(160 of 1500)Black Satin blade CTIIs 4/2000, 6/2000.
(? of 1500)Two Tone Black Satin/Non-Polished Blade Claw Logo Serial Numbered Partially serrated and Non-serrated CTIIs 7/2000.
(6?-35?)Black Satin blade Double Edged CTIIs made by Tony and Al with Dagger logos and Black hardware for CFI dated 3/2000, but assembled in 12/2000 and
01/2001.
(1)4/2000 Production CTII #775 with Single Edge HP blade with Satin Flats done by Tony, Damascus Button, and Damascus Safety- this piece was done this way
for JC due to him having to wait several months for it to be repaired. The piece has proper documentation from MT stating its authenticity. The piece was
sent in for repair on 7/2000, and was finally completed in 3/2001.
(300)Stone Wash, BB, or Black Boride coated Machine ground blade Claw Logo Production CTII 04/2001.
(1)Black Covert Combat Talon II plain edge.
(350)CTIII Machine ground Black or Stone Wash blade new design CTII blade called the CTIII 6/2003.
VULCAN/Exodus
(5)Prototype High Polised Thick Tanto blade CTII in a Dagger logo 3/2000 CTII handle with front and back Carbon Fiber inlays made for the Shot Show 2001- aka
The Vulcan made for Scotty B. owner of CFI.
(1)Black Covert Exodus with Tritium inlayed on both sides of the charging handle.
(?)Production Vulcan/Now called the "Exodus".
DRAGON SLAYER
(11)Dragon Slayers 1st run w/Damascus Inlays 5/97 and no safety.
(1)Dragon Slayer (Al handles) Damascus Blade Prototype.
(1)Dragon Slayer (Al handles) Mirror Blade Prototype.
(1)Dragon Slayer (Al handles) Satin Blade Prototype.
DRAGON SLAYER II
(30)Dragon Slayers 2nd Run/DS II with Black Lip Pearl Inlays and Safety 8/99.
DRAGON SLAYER III
(20)DS I and DS II hybird chassises with Black Lip MOP inlays- for 2004.
MASTERPIECE I
(1) MASTERPIECE I with Horn handles, Swing Guards, and SATIN Blade- The ORIGINAL made in 1997.
(1)MASTERNEMESIS- a Satin blade Satin chassis Buffalo horn scale Masterpiece variant with a thicker handle based more on the Nemesis- made in late 1998 for a gentleman in CA.
MASTERPIECE II
(1) MASTERPIECE II with White Ivory handles, Swing Guards, and HIGH POLISHED Blade 10/2000.
(1)Rados/Marfione MASTERPIECE II with Fossilized Blue Mammoth Ivory Scales Rados Turkish Damascus blade Rados Turkish Damascus Swing Guards Mirror Polished
SS chassis with Satin flats and Ceylon Blue Sapphire inlaid button 12/2000.
(1)High Polished blade Black Lip Pearl scale Masterpiece II with Abalone inserts in the scales done between mid 2001- early 2002.
MASTERPIECE III
(1)Buffalo Horn handle Masterpiece III with Satin blade and hardware made to look like the original made in late 2002.
(7)Masterpiece III due out at end of 2003/Early 2004- various handle and blade materials and designs.
NEMESIS
(5)Black High Polished Brend Blade 1st Run Nemesis 5/98 w/Dagger Logo (#'s 1,2,4,5. and 100).
(5)2 w/safety - 3 wo/safety Prototype Nemesis.
(107)Damascus Nemesis 12/98 w/Dagger Logo.
(95)Mirror Nemesis 5/98 1st Run w/Dagger Logo.
(1)Claw Logo Mirror Polished Blade Nemesis #912 with "Walter Brend" Marked on the Charging Handle 4/99- this piece was done for Joel P. originally by Walter
Brend. This is the only Walter Brend HP blade Claw Logo Nemesis.
(?)Black Glossy Satin/Non-Polished Blade Claw Logo Serial Numbered! Nemesis 4/99.
(How many were screwed up?)Two Tone Black Glossy Satin/Non-Polished Blade Claw Logo Serial Numbered! Nemesis 4/99.
(108?)1st Run Nemesis 5/98 w/Dagger Logo.
(?)Serrated Claw Logo Nemesis with Serial Number 01/99,4/99,8/99.
(300+)Claw Logo 1200 grit Brend Satin Finish Nemesis with Serial Number and Kydex Sheaths 11/99, 12/99, 2/2000.
(133[1/99],?[4/99],?[8/99])Claw Logo Nemesis with Serial Number 01/99,4/99,8/99.
(1)1 Side Fully Serrated/1 Side Plain, Non Serial Number/Non Logo Nemesis 10/98 with Paperwork from MT.
(65)Serrated Non Serial Number/Non Logo Nemesis 10/98.
(175)Non Serial Number/Non Logo Nemesis 10/98.
(5)Nemesis III with Black Lip Pearl Button, Claw Logo, and 1200 grit Satin Finished blade 11/99 for Travis of RCCK.
(1)Claw Logo Mirror Polished Blade TONY GRIND Nemesis with Black Lip Pearl Button 2/2000 for Travis of RCCK.
(225)Machine Ground blade Claw logo Nemesis 6/2003- made from handle parts from the Brend runs- Stonewash, Satin, Black, or Combo blades- mismarked Nemesis II on charging handles.
EXCALIBER
(1) EXCALIBER- A Long Slender 5" Stiletto blade Abalone Inlaid Polished SS Chassis SA OTF (TRUE ONE OF A KIND MT).
HALO I
(1)SPLASH HIGH! Glossy Polished Handle CLAW LOGO Marked Handle HALO I with High Polished Button, and a Damascus Ladder Pattern blade with GOLD CLAW Logo and
Signature on the blade made for 9/95 Fighting Knives Magazine Cover (This is the actual Cover Knife).
(1)PURPLE SPLASH HIGH! Glossy Polished Handle CLAW LOGO Marked Handle HALO I with High Polished MIRROR Blade, Abalone Button, DUAL Abalone Inlaid Charging
Handle , and a Custom Molded Zipper Pouch.
(1)STERILE Black Blade HALO I HALO-X (Teflon Coated).
(1)BLUE/PINK/RED/YELLOW SPLASH CLAW LOGO Marked Handle HALO I with High Polished Button, a Mirror Polished Top Part of the Blade, made for Rick of anolaze.com.
(5)Ivory Button Damascus HALO I w/Gold Claw Logo and Signature.
(10)Damascus HALO I w/Gold Claw Logo and Signature on Blade with Polished buttons.
(20) Prototype STERILE Plain or Serrated HALO I ?/95.
(?)HALO I Transition Variants with High Polished Button like the CFOs and Blade Marked "HALO/Anti-Personnel" with Very Early Serial Numbers 2/95, 4/95.
(?)HALO I Transition Variants with High Polished Button like the CFOs and Blade Marked "HALO/AP" with Early Serial Numbers 04/95.
(250)Tritium Button HALO I (Teflon Coated) 12/95, 1/96.
(500ea.?)HALO I (AP###/Plain & APS###/Serrated) 2/95, 4/95, 12/95, 1/96.
HALO II
(1)HALO II STERILE Prototype.
(33)Walter Brend Mirror HALO II 10/97 w/Claw Logo and Custom Leather Sheaths.
(?)Dagger Logo on handle Prototype HALO II with the MT logo on the blade and marked "Prototype with SS charging handle- made in early 1997.
(20)Claw Logo on blade Prototype HALO II 5/97 with SS charging handle.
(50)Damascus HALO II 10/97 w/Dagger Logo and Custom Leather Sheaths.
(?)Claw Logo on Blade/Non-Mirror HALO II as adevertised by Jim Ray.
(5)3/4 Serrated Black Blade HALO II 5/98.
(24)Two ToneBlack HALO II 5/98.
(24)Two ToneSilver HALO II 5/98.
(300)Black Blade HALO II 5/98- *note*- one Bead blast one was sent to MT for Black boride coating- harder than the older "Black Ti" coating.
(?)Black Tactical HALO II made from parts from the original HALO II runs and released in 2002.
(~4000++)HALO II (9/97,10/97,3/98,4/98, ?/2002, 1/2003, 3/2003 -various dates).
(?)Two-Tone Black and All Black HALO II rereleases dated 1/2003 and 3/2003 with MT Logo on Blade.
(25) Halo II Microholics.org Forum Knife. Polished hardware, Dagger logo on the handle, Microholics.org logo on the blade, marked "Hand Ground by Anthony
Marfione 09/2003" on the charging handle.
HALO III
(4)Brend Mirror Blade/Abalone Button STERILE Patriot Prototype 04/99.
(1)Brend Mirror Blade/Black Lip Pearl Button STERILE Patriot Prototype 04/99.
(1)Blued High Polished Blade Abalone Button STERILE HALO III.
(2)Brend Mirror Blade Abalone Button Abalone Charging handle inlay AND Abalone Overlay!! SS Handle HALO III 09/99.
(11)Brend Mirror Blade/Abalone Button and Abalone Charging Handle Inlay Stainless Steel Handle HALO III 09/99 - at least one had Black Lip Pearl instead.
(19)Damascus Blade Black Lip Pearl Button and Black Lip Pearl Charging Handle Inlay Stainless Steel Handle HALO III 09/99.
(4+)Damascus Blade Black Lip Pearl Button and Black Lip Pearl Charging Handle Inlay Engraved SS Handle HALO III 09/99- Engraved after they left MT.
(8)Brend Mirror Blade/Abalone Button and Abalone Inlay Blade Show 1999 Patriots 06/99.
(1)B.B. Blade STERILE Patriot Prototype 03/99.
(6-8)PreProduction Patriots with Hand Ground Bead Blast Blades marked Patriot with Special Prototype Kydex Carry Sheaths 1999 BLADE SHOW 6/99.
(2)CAMO Handle Patriot STERILE Prototypes 03/99.
(?)CAMO Handle Patriots for the Blade Show 1999 06/99.
(3)Silver/Chromium Nitride Coated Blade Patriot Prototypes 03/99.
(4)Black Ti/Titanium Carbonitride Coated Blade Patriot Prototypes 03/99.
(4)Satin Blade Abalone Button and Abalone Inlay HALO IIIs.
(1)Satin Proper Chisel Grind Blade Black Lip Pearl Button HALO III.
(10+1)Blued High Polished Blade Gold Lip Pearl Inlay Chisel Grind HALO III 03/2000.
(100+)Brend Satin Blade Claw Logo Pre-Production HALO III with Kydex and Leather Sheaths 11/99.
(1)Mutant HALO II blade HALO III handle Mutant HALO 2.3.
(1900+ as of 7/2000)Production HALO III with Black Ti, Silver Chromium Nitride, Stone Wash, or True Glass Bead Blast Finished Plain or Serrated blade (10/99,
11/99, 12/99, 7/2000 -various dates).
(10)Production HALO III with Black Ti Fully Serrated blade 11/99.
(2)Chisel Grind High Polished Bevel/Bead Blast Flats HALO II Blade GOLD LIP PEARL Inlaid Charging Handle and Button STERILE HALO III with Leather Sheaths.
(3)Tritium Prototype HALO III Button HALO III for Blade Show 2000.
(1)Factory Tritium Retrofitted Button Black plain blade HALO III #550 11/99- with a note from Tony saying to "Watch out what you wish for!".
(1)CAMO Handle STERILE HALO III made in 7/2000.
(180)Tritium Button HALO III 7/2000 with Stone Wash or True Glass Bead Blast Finishes.
(200?)Tritium Button HALO III 7/2000 with Black Ti blade.
(2)Chisel grind HP Blade GOLD LIP PEARL Inlaid Charging handle and button STERILE HALO III made for TAD in 9/2000.
(1)HP Chisel Grind Blade HALO III with Abalone inlaid Charging handle and button made for Chief by Al 11/2000 with Black Tactical hardware.
(8)HP Double Ground Tanto HALO IIIs with Charging handle and button inlays made for TAD in 11/2000 - 2 with Gold Lip MOP, 2 with Black Lip MOP, 2 with
Abalone, and 2 with Tritium button and Carbon Fiber in Charging handle.
(2)Satin finish Double Ground tanto HALO IIIs with Tritium button and Carbon Fiber in Charging handle made for TAD in 11/2000.
(1)HP Blade HALO 2.3- (HP HALO II blade in HALO III handle) with Abalone inlaid Charging handle and button made for Chief in 11/2000.
(3-4)Chisel Grind 12/2000 HALO III made for Shot Show 2001.
(100+)Claw Logo DT SS Spirograph Damascus blade Abalone button HALO III 02/2001.
(24-30+)Claw Logo DT SS Spirograph Damascus blade Abalone button SPLASH Colored handle HALO III 02/2001- the last 6 or so had DT Ladder Twist SS Damascus.
(4)Chisel Grind HALO III with HP blades and Special inlaid blades, buttons, and Charging handles- CF/Abalone/or Pearl 03/2001.
(1)HP Chisel Ground Blade HALO III with Tritium button made in 03/2001.
(10)HALO 2.3's with HP blades and Special inlaid blades, buttons, and Charging handles-CF/Abalone/Yellow or Black Lip MOP made for TAD 3/2001- 3 Abalone, 3 Black lip, 2 Gold lip and 2 CF made.
(112)Tactical All Black Claw Logo HALO III 03/2001.
(8)SPLASH HALO 2.3's with HP HALO II blades and Abalone buttons in Dagger logo 3/2001 SPLASH handles.
(2)Sterile SPEC OPs Tactical Tritium HALO III's with VERY long Tritium vials in the Charging handle 04/2001.
(1)Pimp Red SPLASH HALO 2.3 with HP HALO II blade inlaid with 1 Abalone insert in the center blood groove on the blade, Abalone Charging handle inlay, and 1 carat Ruby inlaid button dated 3/2001 with Dagger logo.
(1)Pink, Blue, Gray SPLASH handle MOP button HP Tanto blade HALO III made for the MEC.
(5)HALO 3s in a standard black plain edge sterile format were sold to a special organization. These had standard hardware. These may be damaged or destroyed
beyond recognition (FUBAR). 2 of the Tactical Black HALO 3s with the Claw Logo had Tritium inlays in the charging handle (this may be on the list elsewhere).
(1) Black Covert HALO 3 was done in plain edge as a show knife for the special unit above.
(3)Black Covert HALO 2.3s with plain edges. 1 of them went to another special organization.
(1) SPLASH HALO 3 with Polished hardware, Dagger logo, Mirror Polished blade, Abalone inserts made to match an Old Gen I SPLASH L-UDT with Ray Skin inserts.
(3)Dagger Logo Black anodized Al Handle HP blade HALO 2.3's with inlays running the length of the blade, inlays in the charging handle, and inlays in the
button- inlays are 1 CF, 1 Abalone, 1 Norwegian Abalone. Dated 9/2003 on the Charging handle.
GIANT HALO
(1)SPLASH GIANT HALO with HP blade and Claw logo made in Early 2002.
(1)#001 High Polished Blade Abalone Button GIANT HALO.
(4of5)Giant HALOs with Bead Blast blade and CLAW logos made for the June Blade Show 1997.
HAWKSBILL HALO (OTF HAWK)
(3)HAWK/Original Curved Blade HALO I Type OTF Prototypes.
MICRO MINI HALO
(1) Brend Satin Blade #012 Micro Mini HALO 01/99.
(11) Brend Mirror Blade Micro Mini HALOs 01/99- some had Abalone buttons.
(68) Damascus Blade Micro Mini HALOs 01/99-some had Abalone buttons- i.e. #003.
ULTRATECH DA OTF: Prototypes and Customs
(1) ULTRATECH Single Bolster High Polished Carbon Fiber Scale High Polished Blade Prototype I DA OTF with Clip.
(1) ULTRATECH High Polished Carbon Fiber Scale High Polished Blade Prototype II DA OTF made for Blade Show 2000- TWO bolsters.
(1) ULTRATECH High Polished Carbon Fiber Scale High Polished Blade Prototype III DA OTF made for Shot Show 2001- One bolster and an End Cap- this was the top slider model that later would be revised to become the UT5.
(1) ULTRATECH High Polished Carbon Fiber Scale High Polished Blade Prototype IV DA OTF made for Eugene Auto Show 2001- One bolster and an End Cap and "Side Slider".
(1) ULTRATECH High Polished Carbon Fiber Scale High Polished Blade Prototype V DA OTF One bolster that is angled, end Cap and "Top Slider".
(2)Sterile Al handle Tactical UTIV Side Slider Prototype done in 2001- Green Micarta Scales and black Hardware and clips with Satin blade- actually- one is a Prototype done in 2001 for TAD originally and the other was done in late 2002/early 2003.
(1)Sterile Al handle UTIV Side Slider done in 2002 Brownish Green Micarta Scales and HP Clip Point blade.
(1)Sterile HP chassis HP blade Pink Ivory wood scale double pink sapphire inlaid side slider UT 4 Prototype 6/2001.
(11-13)UT5 with SS chassises HP Clip Point blades and CF scales dated 12/2001- one has White MOP scales ($2k+).
(~45)UT5 with SS chassises, CF or Abalone scales, Tanto, Clip Point, or Double Edged blade that is either High polished or Satin finished dated 4/2003- some
of these had their blades swapped out for DE Nemesis like blades in 7/2003 and Serial numbers were separate for some blade styles- i.e. two #004, #005's, etc...
(1)Sterile UT5 with Hot Blued DT Spirograph Damascus Clip Point blade with CF scales- may swap out to GoldLip MOP scales in the future- originally made in 4/2003.
(~5)UT5 Customs for Blade Show 2003- 06/2003.
(3)HP DEEP Hollow radical Double Edged Dagger grind blade UT5 with blackened slider and CF scales made for TAD in 6/2003.
ULTRATECH VI- Production and Prototype DA OTFs
(?)Al handle Prototype UT6.
(5)Prototype UT6 D/E Hot Blued Damascus blades with CF handles- 3 in Red CF...2 in Blue CF.
(5+5)CF top and Al handle Prototype UT6 with DE or Tanto HP blades- 5 Red CF and 5 Blue CF- only 1 Red CF HP Tanto made.
(?)SPLASH handle UT6 with HP blades.
(1) SPLASH UT6 with Black hardware, Dagger logo, Black Plain edge blade made to match a Old Gen I L-UDT with Ray Skin inserts and a HALO 3.
(2)Clear Lucite handle HP Clip Point blade UT6 Functioning Model knife.
(12) HP blade Dagger logo Prototype Double Edge UT6 wuth Ti Clip.
(12)Ice Blue Damascus blade dark blue anodized Dagger logo handle UT6.
(12)Earth Green Damascus blade dark green anodized Dagger logo handle UT6.
(12)Fire Damascus blade dark red anodized Dagger logo handle UT6.
(10)Alligator Damascus blade CF handle UT6.
(?)UT6 Damascus blades.
(?)UT6 Production models- Stone Wash, BB, Black boride coated plain or serrated blades.
(100) UT6 All black Tactical 9/2002.
(?) Ultratechs with Federal Air Marshal badges laser etched on the handles and the badge number for the owner.
(?) Ultratechs with US Marshal badges laser etched on the handles and badge number for the owner.
(2) Sterile Black Plain Double edge UT6 with standard hardware.
(3)HP Tanto blade CF and Al handle UT6 with blued screws and Damascus slider and Dagger logo blackened clip made for TAD in 6/2003- they are more desirable than the Prototypes.
(1)Abalone Handle DT Damascus blade UT6 made for the MEC.
(?) Bronze Anodized Body UT6's with Black or Satin or Two Tone Moly Coat Clip Point blades- 9/2003.
(?)CAMO handle UT6 with Black Hardware and blades- 9/2003.
(2)Assmascus UT6's made for Robert of the Bright Edge.
(15 sets)Clear Top UT6 sets with 2 knives in each set: 1 DE HP and 1 HP Clip Point. Sets come with Custom Leather sheaths for each knife with the MT logo on the sheaths. Dagger logos on clips and dated 11/2003.
(25 per color)Red, Blue, Orange, whatever color is next, etc... anodized handle UT6's with SW or Satin blades- Clip Point or DE 12/2003- 1/2004, 2/2004.
(?)Black Tactical UT6 with DE Molycoat blades 1/2004.
UTX 70- Production and Prototype Mini-UT6 like DA OTFs
(6)Carbon Fiber Handle Mini-UT6 Prototypes called the UTX70 dated 11/2003 with Dagger logos on clips, HP Clip Point blades, and a Glass Breaker End cap.
(6)Carbon Fiber Top Al Bottom Dagger logo on clip HP Clip Point blade Bronze screw UTX-70's dated 12/2003.
GIANT UT6 DA OTF
(1) Giant UT6 being made for the Shot Show 2004.
Scarab
(4) Prototype Scarabs with Satin finished blades, Claw logos, Low profile button, with "Prototype" and serial number on the blade- these have Torx screws
?/2002.
(100)San Mai 30 Damascus blade Scarabs with Claw logo on blade dated 03/2003.
(?)Production Scarab with Satin plain or serrated blade ?/2003.
(?)Black blade Scarabs with Satin flats and black, desert tan, or green handles.
(?) Covert Scarab, All Black, Claw logo, pe, serr, 05/03.
(1-22 of 54) Damascus blade, damascus button, CF inlay, dag logo, serial numbered and dated, 'custom' Scarabs 4/2003 Eugene Auto Show.
(23 thru 54) Damascus blade, ti button, CF inlay, dag logo, serial numbered and dated, 'custom' Scarabs 4/2003 Eugene Auto Show.
(2)Black Covert QD Scarabs with plain edges.
(?)Black Covert QD Scarabs with serrated blades. There were a lot as these were sold to the military.
(?)Executive Scarab with no Grip Tape or handle grooves with Claw logo 8/2003.
Makora DA OTF
(8) HP Dagger blade HP CF inlay Makora Custom Prototypes for Blade Show 2003 6/2003.
(?)Makora Black Two-Tone Dagger blade.
(?)Prototypes/Preproduction Blade Show 2003.
(?)Green, Black and SW Blades with Green or Black handles.
(?)Red Handle Makoras that some called "The Fire Ant" 7/2003 and 8/2003.
(1)Black Covert Makora plain edge.
(5+)Custom Two Tone Black sides and Silver flats Al chassis Makoras with HP blade and CF inlays with Dagger logos and serial numbers on Satin Clip made in 8/2003, but no dates on knife.
(8+)Custom Two Tone Black sides and Silver flats Al chassis Makoras with HP blade and Abalone (5), Gold Norwegian Abalone (1), or Black Lip MOP (2) inlays with Dagger logos and serial numbers on Satin Clip made in 8/2003, but no dates on knife (SN #001 and #003 are Black Lip and #007 is Gold Norwegian Abalone).
(16)Winter ice Makoras with Silver natural Aluminum bodies, Clear non skid inserts in the handle recesses, High Polished double edge blades, Dagger logo on Satin clip, Glass breakers, dated 12/2003.
Batama: SA OTF Italian Stiletto
(1)Tony Marfione Batama SA OTF Italian Stiletto Prototype. 11 inches long with Brass liners, Bayonet blade, Rear Bottom bolster release Charging handle. Working safety to lock out fire button. Black swirl Buffalo horn handles. The entire knife is held together internally and all of the brass pins are false to look like the Classic 1950's style side opening Italians-made in 7/2003 for the Guild Show.
SOCOM
(?)Prototype Tactical Black Ti Tanto Blade DA (Chrome Clip) 3/99.
(103 of 105)Tactical Black Ti Tanto Blade DA SOCOM with Claw Logo All Black Hardware and Serial Numbers 5/2000.
(2 of 105)Tactical Black Ti Tanto Blade DA SOCOM with Claw Logo All Black Hardware NO Serial numbers 5/2000 (for Al and Tony)
(?)Black Ti Tanto blade DA 5/97, 6/97.
(?)Black Ti Tanto blade DA 4/99, 5/99.
(?)Black Ti Tanto blade MA 5/97.
(?)Black Ti Tanto blade MA 4/99, 5/99
(?)CAMO Handle Black Ti Tanto Point Blade 4/99 5/99 MA.
(?)CAMO Handle Black Ti Tanto Point Blade DA.
(?)Bead Blast Tanto Blade DA 4/99, 5/99.
(?)Bead Blast Tanto Blade DA 5/97, 8/97.
(6)Tanto Fully Serrated Blade MA.
(?)Bead Blast Tanto Blade MA Marked "Prototype" with Claw logo and Serial number 2/97.
(?)Bead Blast Tanto Blade MA 12/96, 2/97, 4/97.
(?)Bead Blast Tanto Blade MA 4/99, 5/99.
(20 of 100)Satin Tanto Hand Ground DA with Dagger Logo and Blue Ti Clip 8/97.
(80 of 100)Tanto Bead Blast DA with Dagger Logo and Blue Ti Clip 8/97.
(1)High Polished Tanto Blade DA with Ray Skin Inlays 1998.
_______________________________________________________________________
Socom BladeShow-1998. Pieces all came with boxes signed by Walter Brend:
(3 of 9)Sterile Prototype Walter Brend High Polished Tanto Blade DA Blade Show '98.
(2 of 9)High Polished Tanto Blade MA Blade Show '98.
(2 of 9)Sterile Prototype High Polished Black Tanto Blade DA Blade Show '98.
(2 of 9)Sterile Prototype High Polished Black Tanto Blade MA Blade Show '98.
(Note- there is a one "Set" of the above pieces consisting of 1 Black DA and MA sold AS A SET ONLY)
_______________________________________________________________________
(2)High Polished Tanto Blade DA Shot Show '99 1/99.
(30sets)High Polished Tanto Blade DA/MA sets 5/99.
(3)High Polished Tanto Blade MA with Ray Skin Inlays 7/99.
(3)High Polished Tanto Blade DA with Ray Skin Inlays 7/99.
(?)Sterile Tanto Blade DA.
(3)Prototype Hand Made Tanto Blade DA 5/96.
(?)Prototype Tanto Blade with Claw Logo DA.
(30)Damascus Tanto Blade DA 4/97.
(?)Hand Ground Tanto Blade DA Shot Show 99 1/99.
(?)Hand Ground Tanto Blade MA Shot Show 99 1/99.
(2)Damascus Tanto Blade with Pearl Inlays DA.
(1) Brend High Polished Tanto Blade DA STERILE SOCOM with High Polished Black Carbon Fiber Inlays and High Polished Carbon Fiber Buttons.
(1)High Polished Tanto Blade DA STERILE SOCOM with Blue Anodized handles and Abalone button.
(1 pair) 1 Brend High Polished Tanto Blade and 1 Brend High Polished Clip Point Blade DA STERILE SOCOMs with DEEP PURPLE Anodized Handles, High Polished Black Carbon Fiber Inlays, and Black Lip Pearl Buttons.
(2) Socom DA High Polished Old Grind Blades with Black Tactical hardware made for TAD in 9/2000.
(2)Socom DA Satin Finished blades and hardware with Ray Skin Inlays made for TAD in 9/2000.
(1)Socom DA High Polished Chisel grind blade with All Black Hardware and Ray Skin Inlays made for TAD in 9/2000.
(1) Brend High Polished Clip Point Blade DA STERILE SOCOM with High Polished Black Carbon Fiber Inlays and High Polished Carbon Fiber Buttons.
(4) Tanto blade SOCOM M/A knives ground for Tony by a Japanese sword maker with the "Special Steel". The knives are sterile with all black hardware and blades with Satin flats and HP bevels. The knives has the 3-screw 'C' clip that Microtech began using late '98/early '99. Released in 2002.
(5)Prototype Clip Point blade MA dated 5/97.
(50)Damascus Clip Point Blade DA.
(?)Black Ti Clip Point Blade DA (Plain or Serrated) 6/98, 10/98.
(?)Black Ti Clip Point Blade MA (Plain or Serrated) 3/99.
(?)Bead Blast Clip Point Blade DA 1/98.
(?)Bead Blast Clip Point Blade MA 12/97.
(1)High Polished Clip Point Blade Prototype.
(10)Fully Serrated Clip Point Black Ti Blade MA 9/98?
(250)CAMO Handle Black Ti Clip Point Blade MA 3/99.
(1 set of 3)1 Gold Colored Handle Black Ti Clip Point Blade marked with MT Logo and SOCOM M/A MA, 1 Sky Blue Handle Bead Blast Clip Point Blade marked with MT Logo and SOCOM M/A MA, and 1 Purple Colored Handle Bead Blast Tanto Blade STERILE MA.
(1)D/A SOCOM Original Grind Variation Satin Finish- This knife is a one of a kind SOCOM variation made by Tony and Jeff Jordan in 1997. It has a unique grind that looks like a Brend grind combined with an original grind. It has a 1,200 grit satin finish and matching hardware and clip.
(3)SV90 Prototype Steel blade Clip Point Sterile MA SOCOMs.
(?)SOCOM D/A 03/2002. The first knives were available in a glass bead finish and black, later models were stonewash and black. Some, if not all, of the Glass bead and Stonewash knives came with the 3-screw 'C' style clip while some, if not all, of the black blades shipped with the older 2-screw high-ride clip.
(?) SOCOM MA 2002 with Stonewash and Black blades.
Mini SOCOM
(1) Clip point, Pre-prototype, Sterile, Mini Socom Auto made before the '99 Shot Show prototypes.
(1)Tanto Pre-prototype Sterile Mini Socom Auto made before the '99 Shot Show prototypes. The blade grind is very different from the '99 Shot Show knives and the production tanto knives.
(2+?)CAMO Handle Mini SOCOM Black Ti Tanto Blade Auto 3/99 + Silver Tanto Blade Auto 3/99.
Black Ti Tanto Blade Auto 3/99.
Silver Tanto Blade MA.
Black Ti Tanto Blade MA.
(100+) Walter Brend's Daughter (G.Brend) 1200 grit Satin Finish Clip Point Blade Auto 8/99, 9/99.
(1 pair) Non-functioning Sterile Mini Socom Auto Prototypes with the blades locked open for promotional purposes. The tanto has a plain edge and the clip point is serrated.
(6)Tanto Blade Prototype Auto Shot Show '99.
(6)Clip Point Blade Prototype Auto Shot Show '99.
(?)Tanto Blade Prototype MA Shot Show '99.
(108)Damascus Clip Point Blade MA Blade Show '98 6/98.
(?)Hand Ground Black Clip Point Serrated Blade Blade MA Show '98 5/98.
(300+)Hand Ground Silver Clip Point Plain or Serrated Blade MA Blade Show '98 5/98.
(2)Special Clear Light Purple Finished Japanese Samurai Steel blade Mini SOCOM.
(?)Silver Clip Point Blade MA 8/98, 10/98.
(?)Black Clip Point Blade MA 8/98, 10/98.
Silver or Bead Blast Clip Point Blade Auto 3/99, 7/99, 9/99.
Black Clip Point Blade Blade Auto 3/99.
(3)Sterile Clip Point Blade MA S90V Prototypes sent to Spyderco for testing.
(?)Clip Point Blade Colored Handle MA - 7 Colors.
(1 pair) 1 Brend High Polished Tanto Blade and 1 Brend High Polished Clip Point Blade STERILE Mini SOCOM Autos with DEEP PURPLE Anodized Handles, High Polished Black Carbon Fiber Inlays, and Black Lip Pearl Buttons (They Match the Full Size Pair From Above)
(4 Sets) 1 Brend High Polished Tanto Blade Abalone Inlaid Thumbstud MA and 1 Brend High Polished Tanto Blade Abalone Button SA, RAY SKIN Inlay Mini SOCOMs with Clips marked Marfione/Brend.
(476)Black Plain or Serrated Tanto Blade Mini SOCOM Autos with Serial Numbers and Tony's Signature in Gold Writing on the Blade 11/99.
(476)Silver Plain or Serrated Tanto Blade Mini SOCOM Autos with Serial Numbers and Tony's Signature in Gold Writing on the Blade 11/99.
(?)Manual Mini-SOCOM Signature Series.
(25)Mini SOCOM Auto with Fully Serrated blade.
SOCOM ELITE
(3)MA Prototype SOCOM ELITE with Dagger Logos on an otherwise STERILE Bead blast blade 2/2000, 3/2000 - the blades each had unique grinds.
(2) SOCOM Elite Tactical Auto prototypes hand ground by Al. The grind is a cross between the Pre-production grind and the Production grind-really nice and unique. The blade and hardware is black and the knife is Sterile except for a claw logo on the blade.
(30)SOCOM Elite PreProduction grind SA Autos with CFO II style button for Blade Show 2000 5/2000.
(60)SOCOM Elite PreProduction Manual for Blade Show 2000 5/2000.
(1)Sterile Bead Blast blade Socom Elite Auto with the Pre-production grind- produced for a friend of Tony's after the 3 prototypes were made and before the pre-production knives were released.
(500)SOCOM Elite PreProduction Grind MA 6/2000.
(500)SOCOM Elite PreProduction grind SA Auto released from 6/2000-7/2000.
(? of 500)SOCOM Elite Black Ti blade PreProduction Grind SA Auto 7/2000.
(?)SOCOM Elite Production Grind MA 7/2000 and on.
(?)SOCOM Elite Production Grind SA Auto 7/2000 and on.
(?)SOCOM Elite Black Ti blade Production Grind SA Auto 7/2000 and on.
(13 of 15)SOCOM Elite Limited Edition Tactical MA's with Production grind Prototype S90V blades. 14 got coated and lasered with claws, and one was done by mistake, and coated later for Tony to carry- it does not have the claw. 13 were shipped out to dealers.
(6)HP Clip Point blade SOCOM Elite Autos with Black Lip Pearl inlaid buttons made for RCCK in 10/2000.
(2)Prototype Tanto Chisel grind High Polished blade SOCOM Elite MA 11/2000.
(4)DT Sharkstooth Damascus PreProduction grind blade Ray Skin Inlaid handle Black Lip MOP inlaid button SOCOM Elite Autos made for CFI in 12/2000.
(11)Tanto Chisel Grind HP blade SOCOM Elite Autos with Ray Skin inlays made in 2/2001.
(100+?)PreProduction Tanto blade 1st Run SOCOM Elite Autos with Stonewash or Stonewash/Satin Two Tone blade finishes with plain or serrated blades dated 12/2000 and released in 3/2001.
(?)Tanto blade Production SOCOM Elite Autos 04/2001.
(100)DT Vines and Roses Damascus Chisel ground Tanto blade Claw Logo SOCOM Elite Auto dated 05/2001.
(?)Black Two-Tone or Two-Tone Satin/Stonewash combo Socom Elite Tanto Chisel Grind Blade dated 6/01.
(~150)SOCOM Elite Tactical MA with S90-V steel introduced in July 2002. The knives have all Black hardware and the blades have the date of manufacture, the Claw logo, and the S90-V steel designation. The run was to be limited to 100-150 knives- they were manufactured until sometime in 2003. The blades are available in Plain edge and Partially serrated.
(7sets)Socom Elites HP blade Numbered sets - 1 Clip point and 1 Tanto with Dagger logo laser etched on the blade and All Black Hardware- S/N 1-7.
(?)2003 "ERT"- Emergency Response Team SOCOM Elite.
Mini-SOCOM ELITE
(?)Mini-SOCOM Elite Auto Black, Stone Wash, Plain or Serrated blade.
(?)Mini-SOCOM Elite Mil-Tan or Black Blade with Green Handles Auto.
(?)Mini-SOCOM Elite MA with all kinds of different CAMO du jour finishes.
UDT- aka "Mini-UDT"
(1)Jim Davis Sun Valley CA Special UDT Chisel Ground.
(1)Prototype Sterile Military Green handle & lanyard made for Military contract trials.
(?) 8/94, 10/94 and 11/94 Plain and Serr production (serr by Chris Reeve).
(?) 9/94 S.O.F.
(?) 1/95 2/95 and 9/95 production.
(?) 1/95, 8/95 Color Handles.
(63)Ti Handle 3/95.
(12) 12/95 Splash plain with MT logo.
(?) 7/96 Mini-UDT Chisel Ground with Claw Logo.
(5) 6/97 Claw Logo, Damascus, Blade Show 1997.
(95) 6/97 Claw Logo, Blade Show 1997.
(3)Satin Finish Blade Sterile made for Tom after the fact.
Mini-UDT Gen II
(21) 05/02 Anniversary Prototype, BB, Dagger.
(50) 07/02 KFC MT Forum 2002 Knife, Satin, Claw.
(?) 07/02 Black, BB, SW, pe. serr, w lock, w/o lock.
(200)09/02 Damascus; Rain Drop, Ladder, Fireball, Claw logo.
(?)11/02 OD, pe. serr, w lock.
(?) 09/03 Machine Satin, pe. serr, w lock.
(?) 10/03 Claw Logo, All Black, Plain.
(?) 10/03 Claw Logo, All Green, Black Hardware, Plain.
L-UDT
(1)The ORIGINAL 1st Prototype L-UDT. The piece has Wood inlaid handles, Bead Blast blade, Steel button, and it was made in 1994.
(?)Polished Button PreProduction with Claw Logo 7/95.
(?)Tritium Button 9/95, 12/95.
(10)Splash Handle Tritium Button 12/95.
(?)Splash Handle Tritium Button w/o Clip 1/96.
(10) Dagger Logo, Chisel Ground, Tritium button, unnumbered 4/96.
(30 +/-) Dagger Logo, Chisel Ground, Tritium button, numbered (1-30 +/-) 5/96.
(30 +/-) Dagger Logo, Chisel Ground, numbered (35-65 +/-) 5/96.
(30 +/-) Chisel Ground, Microtech Logo, no clip 7/96.
(2)Chisel Grind BladeSTERILE with a Satin Finished Chisel Ground Side and a Mirror High Polished Hollow Ground Side CUSTOM (Gift from Tony!- one for his son too) L-UDT with Custom Clip.
(2)Double Hollow Ground, Both Faces Mirror Polished, Crimson Colored Anodized Handle L-UDTs with High Polished Hardware.
(2)Double Hollow Ground, Both Faces Almost Mirror Polished- High Satin, L-UDT with High Polished Hardware and Blue Ti clip.
(6)Ti Handle L-UDT ?/95.
(1)Black Ti Blade L-UDT with Claw Logo and Purple Anodized Handles (Matches 1 Of Purple HAWK).
(?)Splash Handle Tritium Button with Clip 10/96.
(?)Splash Handle 10/96, 11/96, 1/98, 2/98.
(?)Production Models 9/95, 12/95, 10/96, 11/96, 1/98, 2/98 and 5/98 (Earlier and Plain Edge Models Worth More)- note there are 300 5/98 marked blades used to repair pieces when they are sent in, but there was no 5/98 run.
(?)Black Ti Blade 11/96 serrated only.
(300?)Black Ti Blade with Claw Logo with OD Dark Green Handles 3/97 PE and Serrated.
(100)Damascus Blade, Serial Numbers 1-50, and 52-100, 1/98.
(1)#51 Splash Handle Damascus Blade 1/98 (Note- Splash Handle was Added Later).
(?)Colored Handles 9/95, 12/95,10/96, 1/98, 2/98.
(?)Splash Handle Black Ti Blade 2/98.
(1 set) 12 Numbers of the Clock Colored Handle L-UDTs with Polished Hardware and Polished Clips done by George. These pieces were originally made for a Clock Face that MT was going to use in an Ad campaign.
(1)Sterile Bead Blast Blade Tritium Button L-UDT with Paperwork from MT and a Signed Box that says "Automatically Yours".
(200) 5/98 Bead Blast plain edge blade L-UDT's released in 2/2002.
L-UDT Gen II
(10)Chisel Grind Red Canyon CK 12/99.
(30)Satin Blade Red Canyon CK 12/99- at least one has a Black Lip Pearl button.
(10)Walter Brend High Polished Blade Red Canyon CK 12/99.
(1 of the 10)High Polished Blade Red Canyon CK 12/99 #002 with Abalone button.
(1)RCCK 12/99 L-UDT with Satin blade, HP hardware done by Al, and a Tritium button- done by Al in 2000.
(1)Jerry Rados Turkish Damascus Blade Al Handle L-UDT (A. Marfione 1999)with White Pearl Inlays- gift from Tom to Ty.
(1)Jerry Rados Turkish Damascus Blade Al Handle Ray Skin inlay L-UDT- A. Marfione 12/99.
(1)Jerry Rados Turkish Damascus Blade Al Handle L-UDT (A. Marfione 1999) with HP Black CF Inlays and Button.
(1)Jerry Rados Turkish Damascus Blade Al Handle L-UDT (A. Marfione 1999)with Ray Skin Inlays and MOP Button.
(10)Black Blued High Polished Left Hand Chisel Grind Blade STERILE Al Handle Carbon Fiber Inlay L-UDTs 04/2000.
(1)Black Blued High Polished Blade STERILE Al Handle Ray Skin Inlay L-UDT 04/2000.
(1)Tritium Button STERILE L-UDT RIGHT HAND Chisel Ground Mirror Polished Black Ti/Black chrome look blade Carbon Fiber inlay Polished hardware in black coat that matches the blade.
(2) STERILE L-UDT RIGHT HAND Chisel Ground Mirror Polished Black Ti/Black chrome look blade Carbon Fiber inlay Polished hardware in black coat that matches the blade L-UDT.
(4)Hot Blued High Contrast Rain Drop Pattern Damascus Blade Black Rayskin Inlaid Handle Black Lip Pearl Inlaid Button L-UDTs with Zippered Cases made for Travis of RCCK 4/2000.
(20)Tritium Button ALL BLACK Tactical L-UDT with Dagger Logo 5/2000.
(2)Old Style Gen II handle L-UDTs with DT Spirograph blades made in 12/2000.
M-UDT
(3) ?/99 Pre-Prototype, Sterile, Unique Grinds, Bead Blasted.
(9) 1/99 Prototype, Bead Blast.
(5) 1/99 Mirror Polished W. Brend on Blade, All Black Hardware (One with Satin Hardware), Shot Show '99.
(103) 2/99 Tactical, Dagger, All Black.
(?) 3/99 Production Run, Bead Blasted and Black, Plain and Serrated.
(105) 3/99 Walter Brend Mirror Polished Blade, Polished Hardware.
(104) 5/99 Devin Thomas Damascus, All Black Hardware.
(1) ?/99 CAMOuflaged, Sterile, Bead Blasted, Black Hardware.
(4) ?/99 CAMOuflaged, Sterile, Black Blade, Black/Gray Hardware, (2 Plain and 2 Serrated).
UDT 2000
(1) Anopeen finished UDT 2000 #0000 4/2000(1st one made and the only Anopeen finished UDT 2000) with Red spacers, a gift from Tony to Al.
Stone Washed or BB finish UDT 2000 Edition SA 5/2000.
Black Ti UDT 2000.
Black Boride UDT 2000.
(100)Rain Drop and Ladder Pattern Damascus UDT 2000 with Claw logo 5/2000.
(300)Color Handle UDT 2000 with Black Ti or Stone Wash finished blade- Red/Ocean Blue/Green/Purple/Turquoise/Silver 7/2000.
(4+)Anopeen Finish UDT 2000's released in early 2001.
(84)5/2000 Anopeen UDT blades placed in M-UDT handles in 3/2001 and released in 4/2001.
(1) STERILE Bead Blast blade violet spacer UDT 2000.
L-UDT 2001
(7)Gen III Prototype I L-UDT 2001 with DT Spirograph Damascus blades without Safeties- 1 has a Rados button.
(50)Various Damascus Pattern L-UDT 2001's with Claw Logo's done in 3/2001- patterns include Spirograph, Ladder, Twist, Vines and Roses, Rain Drop, and others by DT.
(?)Production L-UDT 2001 with StoneWash, Black, etc... blades- 4/2001 and on.
(?)Colored handle Production L-UDT 2001 with StoneWash, Black, etc... blades- 4/2001 and on.
(1)Blue Colored Handle L-UDT 2001 with Two Tone Black blade and All Black Tactical hardware- SN# 1965 dated 06/2001.
(?)"Tony on the Side" Sterile HP blade L-UDT 2001's made in 2001.
(11)Sterile HP blade Satin hardware Tritium button L-UDT 2001's 05/2001.
(11?)Hot Blue Damascus blade L-UDT 2001 with bronze hardware and MOP button.
(?)Claw Logo and Sterile DT Damascus L-UDT 2001 with "Roses", "Odin's Eye", or "Hakka Pelita" patterns- the non-sterile ones are dated 6/2001 (add $50+ for a Abalone button).
(?)SPLASH Damascus blade Claw logo 6/2001 L-UDT 2001 in various colors.
UMS
(2) 02/03 Prototype, Black Blade, Claw.
(2) 02/03 Prototype, OD Blade, Claw.
(?)03/03 Production, Black, SW, Satin Blades, pe, serr.
(4) Covert, Sterile, All Black, Plain Edge.
(100) Covert, Sterile, All Black, Serrated.
(100?)05/03 Mil-Tan Handle, Black, Mil-Tan, SW Blades, Blk Hdw, pe, serr.
(65) 05/03 Firefighter, Black, SW Blades, pe, serr.
(50) 05/03 Firefither (Misspelled by MT ), Black, SW Blades, pe, ser.
(?)2003 "ERT"- Emergency Response Team UMS.
KESTREL
(3) Kestrel Pre-Prototype Models that are STERILE with Individual Bevel Grinds Bead Blast MA.
(17)Bead Blast Blade Prototype MA Shot Show '99.
(15)Bead Blast Prototype Auto Shot Show '99.
(?of15)Black Ti Coated after the Shot Show (?)Bead Blast Prototype Auto Shot Show '99.
(10)High Polished Blade MA Shot Show '99.
(10)High Polished Blade Auto Shot Show '99.
Silver or Bead Blast Production Models MA.
Black Ti Production Models MA.
Silver or Bead Blast Production Models Auto.
Black Ti Production Models Auto.
(6?)CAMO Handle Black Ti Models Auto.
(10?)Satin Blade Auto with Abalone Button Marked "Brend" on Clip 5/99.
(106)High Polished Brend Blade Auto, with All Black Hardware, and Black Clip with Name & Serial Number 5/99.
(6)High Polished Brend Blade MA with Ray Skin Inlays made for RCCK.
(1)Walter Brend high polished blade Abalone Thumbstuds Black hardware MA.
(3-4 of 106)Walter Brend High Polished blade Black Rayskin inlay and Black hardware Auto 5/99- modified by Tony for RCCK and himself.
(300+)Tritium Button Kestrels 5/2000.
(3)High Polished Chisel grind blade Abalone button Ray Skin Inlay Satin Hardware Kestrel Auto made in 9/2000.
(6)HP SPLASH Handle HP blade Ray Skin Inlay Kestrel Autos done in 2/2001.
VECTOR
(1) Prototype Vector MA.
(2)Damascus Blade Prototype Auto Shot Show '99.
(2)Damascus Blade Prototype MA Shot Show '99.
(?)High Polished Brend Blade Auto Shot Show '99.
(?)High Polished Brend Blade MA Shot Show '99.
(7)High Polished Blade Auto Blade Show 6/99.
Silver or Bead Blast Production Models MA.
Black Ti Production Models MA.
Silver or Bead Blast Production Models Auto.
Black Ti Production Models Auto.
CAMO Handle VECTOR MA.
(6)CAMO Handle VECTOR Auto Blade Show 1999.
(15)Brend High Polished Blade Abalone Button Abalone Handle Inlay VECTOR Auto 7/99.
(15)Devin Thomas Spirograph Damascus Blade Vector with Damascus Inlays and Damascus Release Buttons 12/99.
(5)Tritium Button Vectors made for CFI.
(1)Bead Blast serrated blade Tritium button Vector made for LRRP.
(2)HP Chisel Grind VECTOR Autos with Ray Skin inlaid handles.
(6)HP SPLASH Handle HP blade Ray Skin Inlay VECTOR MA done in 2/2001.
(50+)Vinewood Inlay Vectors for MWGE in 2003- plain or serrated blades.
(1)HP blade Ray Skin Inlaid handle Black Lip MOP inlaid button Satin Clip Vector made for Robert of the "BrightEdge" in 10/2003.
HAWK
(20)DT Ladder Damascus Blade Abalone Button Al handle HAWKs 12/1999 and 01/2000.
(100)Damascus HAWKS done in 2002.
(100)Hawk Black Ti Blade with Claw Logo on Blade.
(?)Sterile Hawk.
(9)Sterile Hawk Prototype.
(600+)Hawk with Serial Number 1996.
(300)Hawk Non-Serial Number 1996.
(?)Serrated HAWK 9/96.
(?)Fully Serrated HAWK 1996.
(500)2002 Production HAWKs.
(54-80)Reese Weiland Ground Walter Brend Satin Finish Blade MT Handle HAWK with Serial Number 03/2000.
(96-(54+))Reese Weiland Ground Walter Brend Satin Finish Blade STERILE MT Handle HAWK ~3-4/2000.
(3)Black Ti Blade SPLASH handle HAWKs- 1 of them has scalloped handles- 1 has a Satin blade done by Reese Weiland, and all of them have High Polished hardware.
(1)Black Ti Blade Hawk with Claw Logo and Purple Anodized Handles with Deep Grooves in the Middle of the Handles.
(1)Hawk 03/2000 Reese Weiland ground, Brend satin finished blade. This knife's blade was then HP by Weiland, Buffalo horn overlay added by Weiland, hardware polished by MT, Faustina Mead Talon scrimshaw on horn, and Tony then fabricated a one-of-a-kind button with Black lip pearl "pupil" inlayed in a Gold lip pearl "iris". The knife's been dubbed the "Hawkeye".
(2of5)Hawk with Ti Handle & Black Ti Blade.
(1)Satin Blade Ti Handle MT STERILE HAWK with High Polished Button- The Satin Blade was removed and a Jerry Rados Custom Forged to Shape Damascus Blade was inserted with Vine and Leaf Filework on the Spine.
(1)Hawk with Ti Handles High Polished Walter Brend Blade, High Polished Button, and Custom Spline Work.
(1)Hawk with Ti Handles High Polished Walter Brend Blade, Mother of Pearl Button, and Mother of Pearl Inlays.
(1)MT HAWK: Marked on top of blade 'REESE WEILAND PROTO', HP blade, Mokame Damascus scales (copper & brass).
(1)MT Hawk 03/2000 Reese Weiland ground, Brend satin blade. This knife's blade was then HP by Weiland, Buffalo horn overlay done by Weiland, Hardware polished by MT, Faustina Mead Talon scrimshaw on horn, and Tony personally created a first one-of-a-kind button with black lip pearl "pupil" inlayed in a gold lip pearl "iris". The knife's been dubbed the "Hawkeye"
(?)2003 "ERT"- Emergency Response Team HAWK.
CHAMELEON
(1)All Damascus Chameleon.
(3)Prototype.
(?)Sterile Chameleons.
(100)Hand Ground Serial #1-100 with Dagger Logo.
(800?)Production Run Serial #101-900? 12/95, 4/96.
(25)Damascus Ladder Pattern.
(25)Damascus Rain Drop Pattern.
CHAMELEON II
(6)HP blade Carbon Fiber handle Dagger logo on Black Clip Chameleon II's made in 10/2003 for the "BrightEdge"- SN #003 is Susan Marfione's.
LCC
(7)Prototype LCC MA- 3 Clip edge and 4 Variations for Blade Show 2000 dated 5/2000.
(3)Prototype LCC DA for Blade Show 2000 dated 5/2000.
(7)Prototype LCC DA 6/2000.
(?)LCC MA 08/2000.
Black or Stone Wash blade DA LCC with shorter Bolster 10/2000.
Green or Black Micarta scale DA LCC's with the 2nd Gen longer bolster.
Black Boride blade DA LCC.
Gen IV DA LCC with Black anodized Al bolsters and various blade options- 1/2001 and later.
(1)Sterile LCC D/A serrated with documentation stating that it was the first production LCC D/A assembled by Microtech. Delivered to a military man in Hawaii 10/2000.
(1)Green Micarta scale Sterile Satin blade Satin Ti Bolster DA LCC made for Patrick of TAD in 10/2000.
(1)High Polished Mirror blade High Glossy Polished coated Black Carbon Fiber scale Satin finished Ti Bolster Sterile DA LCC made in 10/2000 for TAD.
(1)Shark's Tooth DT Damascus blade Green Micarta scale Satin finished Ti Bolster Sterile DA LCC made in 11/2000 for TAD.
(1)Polished Green Micarta scale Gold Claw logo Satin High Polished blade Satin Ti Bolster DA LCC made for Tony by Al as a gift in late 2000.
(2)Factory Satin finishing of Machine Ground blade DA LCC's with Logo still on blade 12/2000.
(300)Machine Ground Damascus blade DA LCC's with Gold Claw logo on blade dated 12/2000.
(1)Prototype Green Micarta scale Tactical DA LCC with Black Boride blade and bolster with Green back spacer made for Shot Show 2001 dated 12/2000.
(1)Prototype Green Micarta scale Tactical MA LCC with Black Boride blade and bolster with Green Spacers made for Shot Show 2001 dated 12/2000.
(1)Prototype RED Micarta scale Stone Washed blade DA LCC with BB bolster and Red back spacer made for Shot Show 2001 dated 11/2000.
(10)Gen III Satin Ti bolster HP blade Green Micarta or Black Carbon Fiber scale HP Hand ground blade DA LCC 2/2001.
(5)HP Blade DA LCC's with Abalone thumb studs, Satin Ti bolsters, CF scales, Red back spacer, and Polished skeleton clip with the shark (Lightfoot logo). 1 of the 5 was made with an Abalone pivot that matched the thumb studs and has all polished hardware dated 2/2001.
(300+)Tactical Special MA LCC with Black Boride blades dated 12/2000 and Black hardware with Green Linen micarta scales and Green spacers 3/2001.
(?)Green Linen Micarta handle Satin Machined finish blade MA LCC 5/2001.
(14)HP Hand ground blade Damascus bolster White micarta scale LCC DA for CFI in 4/2001.
(1)LCC/DA with HP blade and Blue Mastadon scales with Damascus inserts matching the Damascus bolsters ?/2001.
(20)Hand ground Mike Norris Damascus blade Damascus bolster DA LCC with White MOP scales, Red Back spacer, Satin harware, Special pouch, and Certificate of authenticity from MT 05/2001.
(13)SV-90 Prototype DA LCC's.
(10) LCC/DA 5 Carbon Fiber and 5 Micarta (GenIII), Handground Satin blade, Sterile made for TAD in 10/2001.
(?)Tactical DA LCC's for TAD and others in 2002 Gen IV (Al bolsters).
(100)Vines and Roses Damascus Sterile DA LCC's 2001.
(~200)Machine ground Gatorskin Damascus LCC DA with Al bolsters (Gen IV), CF scales, Claw logo on blade with Serial number and Polished hardware and liner ?/2002.
(100+)S90V steel blade Gen IV DA LCC's with CF or Micarta scales and Black or Stonewash blade finish dated 7/2002.
(?)S30V steel blade Gen IV DA LCC 7/2002.
(?)S30V steel blade MA LCC 7/2002.
(~30+) S30V steel blade Gen IV DA LCC's with OD Green Blades 2002.
(?)20CV blade Steel Gen IV DA LCC's.
(20)Jerry Rados Turkish Star Damascus blade DA LCC's with Pearl or Ivory scales- some with Rados or other Damascus bolsters - 5 for MiamiNiceKnife and 15 for CFI done in 2002 and/or 2003.
(1)LCC D/A high polish, carbon fiber scales, Ti bolster, and dagger logon on the blade surface. Dagger logo is the only marking on the knife. Delivered 3/2003.
(2)2 Raindrop damascus Dager logo LCC with Satin Ti bolsters and Carbon fiber scales delivered in 3/2003.
ITALIANS
(2)Ivory Handle High Polished Blade Scale Release PROTOTYPE Italian DA Auto Folders 12/99.
(2)Blue Mastadon Handle High Polished Blade Scale Release PROTOTYPE Italian DA Auto Folders 12/99.
(2)Buffalo Horn Handle High Polished Blade BIG Button PROTOTYPE Italian SA Auto Folders 12/99.
(1)Satin Blade Ivory Handle Italian Scale Release for the Eugene Auto Show 4/2000.
(1)Damascus Blade Damascus Bolsters White Ivory Handle Italian Scale Release for the Eugene Auto Show 4/2000.
TM Combat Folder
(4) 4" 1200 Grit Satin Finished Blade High Polished Horn Handle Blue Ti Liner T.M. Combat Folder MA marked "Prototype" with Serial number.
(1) 5" 1200 Grit Satin Finished Blade High Polished Horn Handle SS Liner T.M. "Sterile" Combat Folder MA.
*Note*- The 5" TM Combat Folder was the original and did not have the Blue Ti liners...instead this one had SS liners which Tony cut himself. Walter Brend reportedly put the satin finish on all 5 blades and Reese Weiland pieced them all together. Reese also made the handles, fabricated the Blue Ti liners for the four 4" blade ones, and he cut the Buffalo Horn scales for all of them. The washers, pivot pins, and bushings were supplied by Tony. The 5" one is "Sterile" and the 4" ones are marked "Prototype" with Serial numbers on the inside of the back spacer. A Marfione design but a 3 man team, and a great team at that!
AMPHIBIAN
(2) Prototype Ti Handle MT AMPHIBIAN for Blade Show 2000 MA.
(2) Prototype Ti Handle MT AMPHIBIAN with Rubber inserts in handle and smaller overall size 11/2000.
(?)Al handle Amphibian Prototype 3 made in 4/2001.
(?)Amphibian Auto dated 1/2003 with S30-V steel SW Serrated blade.
(?)Amphibian Auto Black, BB, Plain, or Serrated blade.
(?)Amphibian MA Black, BB, Plain, or Serrated blade.
(?)2003 "ERT"- Emergency Response Team Amphibian.
Tachyon (Ti handles) and Dragonfly (Al handles): Balisong/Butterfly knives
(?)Tachyon Balisong.
(?)Dragonfly Balisong Stone Wash Plain or Serrated blade.
(?)CAMO Handle Black Blade Dragonfly.
Terzuola Marfione Folder
(1)Terzuola Marfione HP blade Prototype Folder with CF scales and Ti bolsters made for Shot Show 2003.
(5)Terzuola Custom Prototype Marfione Folders: 1 HP blade w/ Ivory scales and Ti bolsters, 1 Mike Norris Gatorskin w/ Ivory scales, 2 Mike Norris Gatorskin w/ White MOP scales, and 1 Mike Norris Gatorskin damascus with Abalone scales all made in Spring 2003.
(1)HP blade White Ivory Scale Satin Ti bolster Terzuola Marfione Custom DA Folder made for M&B Fine Gifts 7/2003.
(1)HP blade Abalone Scale Satin Ti bolster Terzuola Marfione Custom DA Folder made for M&B Fine Gifts 7/2003.
(~1500)Production models with CF scales, Ti bolsters, Satin blades with Dagger logo on blade- began production in 8/2003.
(15)Black Hand Ground Blade Terzuola folders dated 9/2003 and 10/2003- made for CFI.
Fixed Blades
MT Fixed Blade Greg LightFoot Collaboration- Bead Blast 8" Dagger shaped blade with Linen Micarta handles made in Spring 2000.
MT Fixed Bead Blast Dagger blade shaped kinda like the Gerber Mark I Dagger with Linen Micarta handles made in 1997 for David C. of MT as a gift.
(3)Prototype MT Lightfoot Fixed blade- The "Wolverine"- 2 Satin and 1 BB- were 1st on display for the Shot Show 2001.
(4)MT Prototype Credit Card Knife, The "Platinum BackUp" 12/2000 made by "MOKI" a Japanese cutlery firm. "Two had Carbon Fiber scales and two had metal scales. On the metal scaled prototypes, one was beadblasted grey steel and the other was Aluminum. The blades were ground by hand by the craftsman at MOKI.
(?)Option II Credit Card Knife with Black, Stone Wash, or BB plain or serrated blade with CF or Micarta scales.
(6) Sterile HP Proto Medallion Neck Knives made with HP bevels, Satin flats and Beadblasted inside ridges. Some satin Protos were done as well and some were sent back to MT to have the Claw logo, "Prototype" and born date placed on the blade.
(?)Medallion Neck knife Black plain or serrated blade.
(?)Marlin Filet Knives
(1) MOKI/Marfione Custom Katana Japanese style sword with Black Lip Pearl inlays.