Продам Hinderer XM-18 3.5" M390 Skinny Slicer, 3.5" XM-18 Spanto (Москва, пересыл)

Территориально Москва, отправлю по России службой экпресс-доставки.
Последние цифры карты СБ **** **** **** 0877

1) Hinderer 3.5" XM-18 Skinny No Choil Slicer M390 - Stonewash - OD Green G-10

Цена: 24 000 --> 24 000 руб.

Overall Length: 8.25" (209.55mm)
Closed Length: 4.75" (120.65mm)
Blade Length: 3.5" (88.9mm)
Blade Thickness: .140" (3.56mm)
Blade Steel: M390
Blade Style: No Choil Slicer
Blade Finish: Stonewash
Handle Material: G-10
Pocket Clip: Yes, right hand only, tip up/tip down
Lock Type: Frame Lock
Weight: 4.7oz
Tri-Way Pivot: Yes
Generation: 6
Состояние: приобретен в ноябре 2019 года, 3 недели на кармане, правил на ремне,
винты на синем фиксаторе резьбы, край ямки в клинке процарапан для более легкого открывания,
в осевом узле бронзовые шайбы.
Комплектация: нож, коробочка, подшипники, фторопластовые шайбы, бумажки.

В сравнении с обычным ХМ-18:

2) Hinderer 3.5" XM-18 Spanto - Stonewash - FDE G-10 CPM-20CV

Цена: 25 000 --> 24 000 руб.

Overall Length: 8.25" (209.55mm)
Closed Length: 4.75" (120.65mm)
Blade Length: 3.5" (88.9mm)
Blade Thickness: .165" (4.19mm)
Blade Steel: 20CV
Blade Style: Spanto
Blade Finish: Stonewash
Handle Material: G-10
Pocket Clip: Yes, right hand only, tip up/tip down
Lock Type: Frame Lock
Weight: 5.6oz
Tri-Way Pivot: Yes
Generation: 6
Состояние: приобретен в январе 2020 года, 3 дня на кармане, не правил,
винты на синем фиксаторе резьбы, край ямки в клинке процарапан для более легкого открывания,
в осевом узле бронзовые шайбы.
Комплектация: нож, коробочка, подшипники, фторопластовые шайбы, бумажки.

kentaureion
винты на синем фиксаторе резьбы

Осевой или все винты? Это важный момент

kentaureion
Все винты.

Тем самым вы сняли ножи с гарантийного обслуживания в RHK. Производитель рекомендует использовать синий локтайт только для осевого.

На сайте www.rickhindererknives.com в разделе "Terms and Conditions" среди случаев, которые не попадают под действие гарантии отсутствует раздел про использование фиксатора резьбы.
Однако в первом абзаце написано про детент, который я ослабил:

— User modifications to folding knives that are not covered under warranty: Modifying or altering the detent in the blade or lockside, the lockface itself, the blade tang, thumbstud, and lockbar cutout. If modifications like these are performed on your knife they can ruin the lock up and or action of your folding knife. These modifications could render the knife unsafe.

— 3rd Party Anodizing: We cannot warranty a knife that has been heat anodized with a torch. HOWEVER we will not void your warranty for using DC current to electro-anodize your titanium parts.

— Using Aftermarket Fasteners and Parts: You are welcome to change your knife hardware without voiding your warranty. Example: Titanium clip screws are a common upgrade, installing a set would not void your warranty. The only case that would cause a warranty issue would be using improper hardware that would cause an issue with the knife that otherwise would not be there if you had the stock Hinderer parts installed.

— Bevel Re-Grinds: If you have your bevels reground by someone else we will not void your warranty unless the grind has a direct impact on the problem with your knife. For instance if you had someone grind the tang to change the lock up and a problem with the lock occurred, there would be a cost associated to fix the problem caused by someone else.

— If we determine that it is something other than a defect in workmanship or materials, we will inform you if the product can be repaired and your cost. If your knife has been abused or has seen hard use for a long period of time, it is possible that the useful life of the product has been exceeded.

— ***A side note for those of you who can’t flip your knife open to your liking, this is not a warranty or service issue. There are plenty of threads on the subject in our online forums at bladeforums.com and usualsuspects.net as well as youtube videos that can help you. Oil, pivot adjustments, and technique is where you will find your answers….The same goes for blade centering, lots of threads and info on the forums to help you out

Обсуждение Detent tuning на форуме Spyderco: https://forum.spyderco.com/viewtopic.php?t=82412